Wireless Dual-Element PIR motion Sensor- Model:PIR-100B
Wireless Outdoor Dual PIR Motion detector is designed to provide detection of criminal intrusion through perimeter into a protected area by sensing infrared energy (heat) emitting from an intruder¡¯s body moving through a protected area. The PIR-100D Wireless Outdoor Dual PIR Motion detector powered up by solar panel, no need to connect power wires at all, total wireless connection.
₹ 2,000.00 ₹ 1,200.00
*This sensor works with D3D control panel model D9
The wireless PIR Motion detector is an INPUT DEVICE, The PIR-100B PIR motion detector is designed to provide detection of criminal intrusion through door frames and window frames into a protected area by sensing infrared energy (heat) emitting from an intruder’s body moving through a protected area. The MOTION SENSOR is commonly referred to as a PIR, which stands for passive Infrared. Upon detection of intrusion, the PIR-100B automatically generates an alarm signal to D3D control panel model D9. The sensor also provides a tamper contact output. The unit is RF and EMI Immunity to interferences produced by radio device. The unit is can be wall-mounted by means of a bracket.
Features:
- Internal Wireless Antenna, long distance transmission;
- Learning code, easy to assign to the alarm panels;
- Tamper Switch for protecting the to avoid opened;
- Newly-developed dual element passive infrared sensor unit;
- Wireless transmitting digital signal to control panel;
- Intelligent MCU inside, eliminate false alarm;
- Low power alert by buzzer sounds;
- Microcontroller temperature analysis and Automatic temperature compensation for best summertime detection;
- Tightly-mated bug guard to protect the sensor optics from insects, spiders and dust;
- Selectable detection sensitivity (standard/high) for different environmental requirements;
- SMT adopted, RF and EMI Immunity;
- Low power consumption, long battery life;
- Adjustable detection time span(4minutes or 8 minutes).
Specifications
| Operating Voltage | 9V Laminated Battery |
| Detection Range | Vertical angle 60degree, Horizontal angle 110 degree, 12m |
| Standby Current | less than 12uA |
| Alarm Current | less than 22mA |
| RF Immunity | > 20 V/m 10 – 1000 MHz |
| Sensitivity | > 3300V/W |
| Noise(Vp-p) | <200mV, (mVp-p)(25°C) |
| Transmitting Freq. | 433.92MHz |
| Transmitting Distance | minimum 100m( in the open area) |
| Temperature Range | -10°C to +50°C |
| Relative Humidity | 90% (25 ℃ ) |
| Installation Mode | Wall mounted by bracket |
| Installation Height | 2~2.3m |
| Housing | High-impact ABS |
| Dimensions | 107x59x45mm (HxWxD) |
| Applications | For indoor use. Corridor, Office, Room, Museum, Library, Finance Room, Warehouse, etc. |
Packaging List:
*I PIR-100B motion sensor
*1 9v battery
*1 mounting bracket